DIY Carbon Fiber Overlay Kit

Transform existing automotive trim and custom parts with real carbon fiber using our DIY Carbon Fiber Overlay Kit. This convenient package includes the essential materials needed to apply carbon fiber over a properly prepared part, making it ideal for interior trim, small panels, accents, and other custom projects.

The included primer system creates a strong foundation for the carbon fiber, while the top coat saturates and seals the material. After curing, sanding, and final finishing, you will have a durable carbon fiber surface with the depth and appearance expected from a professionally overlaid part.

Kit Includes

• Primer A, 1 oz
• Primer B, 1 oz
• Top Coat A, 3 oz
• Top Coat B, 1.5 oz
• LV Carbon Fiber Material, 9″ × 43″
• Mixing Cup
• Mixing Sticks
• Application Brush
• Plastic Gloves
• 120 Grit Sandpaper
• 240 Grit Sandpaper
• 400 Grit Sandpaper
• 800 Grit Sandpaper
• 1200 Grit Sandpaper

Great for Small Custom Projects

This kit is designed for overlaying smaller parts such as interior trim pieces, switch panels, gauge surrounds, console components, emblems, and other custom accents. The flexible carbon fiber material can be shaped over a variety of contours when properly applied.

Basic Process

Prepare the original part, apply the primer system, lay and secure the carbon fiber, saturate it with the top coat, and progressively sand the cured surface. A final clear coat or polishing process may be required to achieve your preferred finish.

Important Information

This is a DIY carbon fiber overlay kit and is not a replacement molded carbon fiber part. Final results depend on surface preparation, application technique, curing conditions, and finishing. Review all included instructions before beginning, work in a properly ventilated area, and wear suitable personal protective equipment. Additional supplies or finishing materials may be required depending on the size and complexity of your project.